Skip to content

Overview

This describes the Zero motorcycle platform and includes as many service tasks not described (or incompletely described) in the official Owner's Manuals as customers have identified.

Some information might be hearsay or not completely communicated, but attempts have been made to verify as much as possible.

As with anything in a wiki environment, whatever you undertake with this as a guide is your own responsibility.

Coverage

Unless otherwise stated, this manual refers to the shared SDS Platform and the 2013+ years (Gen2) in particular. - FX,FXS AKA XMX Platform/Gen2

Coverage is reasonable, but progress here would benefit from volunteers invested in these models. - Pre-2013 models AKA Gen1

Maintenance coverage to keep their powertrains running (battery, controller, and motor).

These models varied significantly by year and were produced in smaller numbers. - SR/F AKA FST Platform/Gen3

The SRF Model bikes have only just started reaching customers in small numbers, and represents a very large shift in construction and powertrain details, so this may take some time.

See Unofficial Manual updates based on Zero's SRF on the EMF forum for notes gathered so far.

Source: zeromanual.com/wiki/Unofficial_Service_Manual · Wayback capture of 2025-02-26 · wiki last edited 10 July 2020 00:05. Community-written content from the Unofficial Zero Manual, reproduced for preservation; not written or verified by OpenZero. Links to pages that were not mirrored go to the Wayback Machine.